Therapy with Basic Settings
- (A) Connect the power cable to the QRS 101 control unit
- (B) Connect the applicator cable to the QRS 101 control unit
Connect the full-body applicator to the “Applicator A” connection. The pillow can additionally be connected to the “Applicator B” connection.
Note: It is not mandatory to connect both applicators at the same time.
- (1) Switch on the QRS device
- (2) Select one of the three programs
- (3) Set the therapy duration
- (4) Select the intensity
- Lie down on the mat, or if you are using the pillow, place it on the area to be treated
- (5) Start the therapy
Therapy with Individual Settings
Changes to the basic settings can only be made while the device is switched on. No setting can be changed during therapy.
Changing the Intensity Between Levels 1 and 10
A change in intensity may be useful if a targeted QRS therapy is to be applied.
Furthermore, increasing the intensity is recommended, for example, if you have installed the QRS mat in your bed. If the QRS mat is positioned underneath the sleeping mattress, the distance to the effective field increases. The intensity should be increased by one level for every 10 cm of mattress thickness.
- (1) While the QRS device is switched on, press and hold one of the intensity buttons for 2 seconds
- A flashing intensity setting appears on the display
- Depending on whether you want to increase or decrease the intensity, press (as shown in the illustration) the left button or the right setting button
- Confirm the setting by pressing the A/B ok button between the setting buttons
- The last setting selected remains stored
Changing the Therapy Time from 1 to 60 Minutes
A change to the therapy time is only recommended if you feel that it would be beneficial for you. For example, sleep disorders may, in some cases, be improved by increasing the therapy time to 60 min.
- (1) While the QRS device is switched on, press and hold one of the time selection buttons for 2 seconds
- A flashing time setting appears on the display
- Depending on whether you want to increase or decrease the therapy time, press (as shown in the illustration) the left button or the right setting button
- Confirm the setting by pressing the A/B ok button
- The last setting selected remains stored
Additional Functions
Please refer to the QRS 101 Operating Instructions for detailed instructions on operating the additional functions.
(A) Switching Between Applicators
If you have connected the mat and pillow at the same time, you can switch between the applicators using the A/B button.
- To do so, press the A/B button
- Use the right button (right arrow symbol) to switch to applicator connection B (pillow)
- Use the left button (left arrow symbol) to switch to applicator connection A (mat)
- After selecting the connection, press the A/B button again to confirm
(B) Switching the Display Light On or Off
The display lighting can be automatically switched off by the device, for example so as not to disturb sleep at night.
- Press the I/O button (left) with the light symbol to either activate or deactivate the automatic switch-off
(C) Setting Up Automatically Starting QRS Therapy
Setting up an automatic therapy start is useful, for example, if you have installed the QRS mat in your bed. You can set 2 therapy start times, for example for the morning before you get up and for the evening when you go to bed.
- Please refer to the QRS 101 Operating Instructions for setting up the automatic therapy start
(D) Switching the Sound Signal On or Off
A signal sounds when QRS therapy ends. The signal can be switched off, for example so as not to disturb sleep at night.
- Press the I/O button (right) with the sound symbol to switch the sound signal at the end of QRS therapy on or off
Requesting the QRS Original Manual
The QRS original manual is included with the QRS 101 Home System. If you do not have the original manual and need it, please contact us.
